Kayak — User Manual 159
Install Menus Overview
DD Modes
Selects the operating behavior of the Kayak’s Keyer and E-MEM systems.
A default setting (button not illuminated) selects behavior that is closer to
that of Kalypso/Zodiak switchers.
If a
Key or E-Mem DD Mode button is activated, the behavior of that system
becomes more like that of the KayakDD or XtenDD switcher systems.
Key - See DD Mode Keyer Subpanel on page 102.
E-MEM - See E-MEM - DD Mode of Operation on page 121.
Also see E-MEM Operating Modes Description on page 120 for additional
information.
Note To avoid confusion, if the operating mode is changed you can install the cor-
responding buttons on the panel so their legends are correct, using the tool
provided with your system.
Load / Save Install Data
Note The Save button is grayed out (inoperable) if a USB stick is not present in a
supported control panel USB port. The Load button is grayed out if no USB
stick is present or if no files are available to load from the USB stick. USB
ports labeled SPARE are not supported.
The Load and Save buttons are used to load/save frame Install configuration
settings to or from a USB flash drive.
To Next Page
Loading...
