160 Kayak — User Manual
Section 5 — Kayak Menu Summaries
Install - Panel Misc Menu
Touching Home - Install - E-Box - Misc opens the Install E-Box Misc menu
(Figure 85).
Figure 86. Install Panel Misc Menu
Pgm/ Pst Pos
Sets the operation of the Program Preset busses.
Program/Preset - Program bus flip-flops after transitions complete to always
be above the Preset bus.
Preset/Program - Program bus flip-flops after transitions complete to always
be below the Preset bus.
Follow Fader - Bus flip-flops do not occur.
Cut/Auto Pos
Sets the location of the M/E Cut and Auto buttons, with the Cut button either
on the left or right of the Auto transition button.
Note To avoid confusion, if the button location is changed you can swap the Cut
and Auto buttons on the panel so their legends are correct using the tool pro-
vided with your system.
To Next Page
Loading...
