166 Kayak — User Manual
Section 5 — Kayak Menu Summaries
Note Buttons are grayed out (inoperable) if a USB stick is not present in a sup-
ported control panel USB port. USB ports labeled SPARE are not supported.
Save
- Saves the current application.
Save As - Saves the current application with a selectable file name.
Load - Loads the application files from the USB flash drive into the Kayak
system.
Rename- Opens a dialog window to rename the selected application file.
Delete - Deletes the selected application file.
Edit Devices - If an application file was loaded which was stored in another
switcher system, the device names of this application must be customized.
To Customize Application Device Names:
1. Press the Edit Devices button to display a list of the IP addresses of the
former devices (Figure 91).
Figure 91. Config – Application Control – Edit Devices
2. Select the control panel and press Modify to generate a list of connected
devices (See Figure 92) in the network.
To Next Page
Loading...
