186 Kayak — User Manual
Section 5 — Kayak Menu Summaries
Config - Misc Menu
Figure 111. Config – Misc Menu
AUX PVW (Preview) / Bus
Auto AUX Preview button: On/Off:
Enable or disable the Auto PVW mode. In the enabled condition, the key
PVW, mask PVW, or the chroma key cursor signal of the respective mixing
level, is switched on the PVW bus.
Bus button:
Selecting the desired AUX Preview Bus: None, Aux1 ... Aux20
Replace Async: On/Off
The button permits the selection of different modes for the treatment of
asynchronous sources in the switching levels (M/E1, M/E2, P/P):
On: If Background/Program are asynchronous, enabled keyers are dis-
abled. If Background/Program are synchronous and the fill signal of a
keyer becomes asynchronous, the enabled keyer is disabled. If Back-
ground/Program or Preset are asynchronous and a transition is selected, a
cut is performed at the end of the transition.
Off: Asynchronous signals are phased over H and are passed.
To Next Page
Loading...
