232 Kayak — User Manual
Section 5 — Kayak Menu Summaries
Edit Gang
The Edit Gang button shows you for which channels parameters are adjusted
in parallel. If more than one channel is selected, the values of the top
channel are displayed.
Figure 156. DPM – Edit Gang Selection
You can select all Keyer channels which are included in this effect. The last
selected channel is the one which has its values displayed.
Selecting the Global channel will deselect the Keyer channels and vice
versa.
Path Type
The path control section allows you to select different interpolation path
types for all or some of the parameters.
Figure 157. DPM – Path Type Selection
To Next Page
Loading...
