Kayak — User Manual 233
DPM Menus
X, Y, Z Spin
For the subgroup Spin the path type can be different for the X,Y, and Z spin.
Figure 158. DPM – Spin Selection
To adjust the parameters for Tension, Continuity, and Bias press the rele-
vant button in the path control section.
Figure 159. DPM – Adjust Tension, Continuity, and Bias
If Path Hold is selected, there will be no interpolation between the key-
frames and the new value will be applied when the next keyframe is
reached.
To Next Page
Loading...
