236 Kayak — User Manual
Section 5 — Kayak Menu Summaries
Save / Discard
This button is only enabled when you have modified the current effect in
the Timeline/ Edit menu. Once you have made changes the pop-up menu
shown below allows you to either save the changes permanently or discard
them. If the Effects section is in control of DPM the question is also asked
in the display there. It is answered by pressing
Enter to save changes and by
Clear to discard them.
Figure 162. DPM – Timeline – Save/Discard
Since the Timeline/Edit menu always refers to the current effect, there are
two ways to start an effect for an empty register:
• Recall an empty register in the menu to select it as the current effect and
add keyframes via Insert in the Timeline / Edit menu.
•Use the
Store button in the main control panel to select an empty register
by using the Store Free” dialogue as the current effect and add the first
keyframe.
Recall
Select a register and press Recall.
This button is disabled when the current effect is modified and the modifi-
cation is not yet saved or discarded.
To Next Page
Loading...
