238 Kayak — User Manual
Section 5 — Kayak Menu Summaries
Figure 164. DPM – Timeline – Video Sources
Loop
This function allows you to put the selected effect in an endless loop:
Figure 165. DPM – Timeline – Loop
Protect
Protects the register against save, delete or rename.
The buttons
Modify / Use Priority / Use Video Sources / Loop / Protect are direct per-
manent changes that do not need confirmation. Using these function does
not select the chosen register as the current effect. A current effect is only
selected by a Recall in the menu, by the
Store and Edit button on the main
control panel and by E-MEM recalls.
Loop:
Run from begin to end.
Bounce:
Run begin to end, then reverse to begin, etc.
To Next Page
Loading...
