Kayak — User Manual 249
DPM Menus
Page Fold
When the Page Fold data pad is selected, the following soft knob controls are
available:
•Radius
Adjusts the radius of the page turn cylinder affecting the sharpness of
the curl.
•Angle
Defines the orientation of the page turn cylinder with respect to the
source X and Y axes, and specifies the direction of the turn.
•Offset
Positions the page turn cylinder with respect to the source plane and,
when interpolated between keyframes, causes the page to turn. The
offset would typically change from one edge or corner of the source
raster to the opposite edge or corner for the turn. (Hint: Offset = 0 will
put the turn at the middle of the screen.)
Show Sides Pane:
Choices of what sides of the effect to display (Both, Front, Back) are available
in the
Show Sides pane. Selecting only a portion of the effect can be used for
multi-pass effect creation.
When Back is Matte is selected, the back of the effect will be a matte color.
The color of the matte can be changed by touching the Back Color data pad
to bring up soft knob controls for
Hue, Saturation, and Brightness.
To Next Page
Loading...
