282 Kayak — User Manual
Section 5 — Kayak Menu Summaries
Modify
Modify allows you to modify the values displayed in the main display area.
After pressing the button a dialog appears to modify the play parameters.
Figure 203. Clips Play Modify Dialog
Go to timecode — Go to a timecode specified by the numeric popup panel
Mark In — Set a Mark In point via numeric popup panel
Mark Out — Set a Mark Out point via numeric popup panel
After Play — Not supported yet
Mode — VTR
Behaves like a tape machine; moves clip to the beginning
Mode — Clip
Mark In and Mark Out limit the accessible timecode range. When you press
play the clip is always played from Mark In to Mark Out.
Readout Still
Field 1: Field 1 is replicated to make a frame and Step-/Step+ advances to field
1 of the next frame
Field 2: Field 2 is replicated to make a frame and Step-/Step+ advances to field
1 of the next frame
To Next Page
Loading...
