294 Kayak — User Manual
Section 5 — Kayak Menu Summaries
the screen. Wait objects of type “Wait number of frames” (i.e. hold) are
drawn as a triangle with a following dotted line representing the hold time,
similar to the hold time of keyframes.
Loops are visualized with an arrow below the keyframes, pointing from the
loop end to the loop begin. The arrow is superimposed with a circle con-
taining the loop count (or “inf” for infinite loops).
The edit cursor is shown as a vertical yellow line, while the currently
selected object is drawn in red.
When
Show Text is selected, timeline data is displayed as text (Figure 213).
Figure 213. E-MEM – Timeline – Show Text
Direct Mode and Digipots
These controls know two modes, Direct Mode On and Direct Mode Off. In Direct
Mode On
, the most frequently needed functions are accessible with a single
button press, while non-direct mode offers the complete spectrum of func-
tionality at the cost of more button presses necessary for each action.
Steps digipot
The Steps digipot allows to move the edit cursor. This automatically
activates edit mode. The edit cursor can only be placed on timeline
objects (keyframes, triggers, waits, loops), not between keyframes.
To Next Page
Loading...
