414 Kayak — User Manual
Section 7 — Sidepanel Menu Summaries
Remote P-Bus
Figure 330. Sidepanel – Remote P-Bus Menu
Function Buttons
Remote P-Bus / Trigger
The Remote / P-Bus enables to manually trigger with Trigger the machines
defined in the Install / E-Box / P-Bus menu. At present, only 1 trigger can
be output on the P-Bus, which then reaches all machines for which in this
case a trigger is adjusted.
In the 1st line, the trigger number is present (can be used, but must not). In
the other lines, this trigger number is adjusted for the respective machines.
To Next Page
Loading...
