Kayak — User Manual 481
Configuration Menus
Config Copy Simple
In the Copy Simple menu, whole applications can be copied. The menu
shows lists for source and destination. In the lists, the available storage
devices, the stored applications or the connected devices of an application
can be shown.
After copying an application from another switcher, the application might
use devices which are not available here. The devices can be changed with
the
Change Device button.
Figure 393. Sidepanel – Config Copy Simple Menu
Show Drive
Internal hard disk and floppy drive are shown in the two selection areas.
There are all drives listed, which are activated in the
Install / System / Drivers
menu
Show Application
The applications of the selected drive are listed in the two selection areas.
To Next Page
Loading...
