KAYENNE — User Manual 101
Control Panel Overview
Note To delegate one row, hold down the E-MEM button and press a bus delega-
tion button or hold down the bus delegation row button and press the E-MEM
button.
•Pri
partition select button—Delegates all four rows of a Source Module
to the primary partition (Rows 1 and 2 are delegated to the last delega-
tion when
Pri was used, Row 3 is delegated to the A bus and Row 4 is
delegated to the B bus).
•
Sec partition select button—Delegates all four rows of a Source Module
to the secondary partition (Rows 1 and 2 are delegated to the last dele-
gation when
Sec was used, Row 3 is delegated to the U1 bus and Row 4
is delegated to the U2 bus).
• Pressing the
Pri and Sec buttons together causes both buttons to high
tally. Both partitions are now controlled but only tallies for the
Primary partition will be seen on the Source and Local E-MEM
modules.
Note Pressing the Pri or Sec buttons delegates the Transition and Local E-MEM
Modules in addition to the Source Module and modifies what wipe generators
can be selected on the Matte and Wipe delegations of the Multi-Function
Module.
• ME delegation indicator—Located between the Sec and Rules Hold but-
tons, displays the current delegation of the panel row to the logical ME
(ME-1, ME-2, PGM, etc.).
Local Aux Module
The Local Aux Module is located at the top of the Control Panel, above the
Stripes (
Figure 77).
Figure 77. Local Aux Module Example
HoldHold
Farar
Mix
MacroMacro
Rtr
AuxKeyKey
SplSplit
Transns
Lock
HoldHold
MacroMacro
Farar
Mix Wipeipe
Rtr
Aux
KeyKey
SplSplit
Transns
Lock
Wipeipe
3Ø
3Ø
AUX2
AUX1
2ND3RD
ME3 A
Black
ME2 A
Black
ME3 A
Black
ME2 A
Black
ME1 A
Black
Bkgd1
Bkgd2
ME1 A
Black
Bkgd1
Bkgd2
2ND3RD
353433323130292827262524232221
2827262524232221
30292827262524232221
2827262524232221
3534333231
8623267_21
To Next Page
Loading...
