GRASS VALLEY KAYENNE - V2.0 - DPOP and SPOP Menu Delegation

110 KAYENNE — User Manual
Section 3 — System Operation
DPOP and SPOP Menu Delegation
DPOP stands for Double Press Open. This is a form of automatic delegation
where a specific menu is displayed on the Menu Panel when a panel button
is pressed twice in rapid succession. A menu can contain controls that do
not exist on the Control Panel. DPOP makes these additional menu controls
readily available. If further delegation exists within the menu, for example
to a specific keyer, that delegation occurs as well. If the menu is already
open, a single press performs the menu delegation (a second button press
is not required).
SPOP stands for Single Press Open. SPOP buttons operate similar to DPOP,
but only a single button press is required.
Active DPOP and SPOP buttons and their menus are listed in Table 2.
Many, but not all of the ‘hard’ buttons (with legends) supporting DPOP on
the Modules are indicated with two triangles on the lower right of the
Table 2. DPOP and SPOP Buttons
DPOP Button Module Menu Displayed
Key 1, 2, 3, 4, 5, 6
Source Select /Multi-Function
Keyer Mode Menu
selected keyer delegated
Macro
Source Select /Local Aux
Macro Catalog
Aux Aux Delegation
Rtr Router Assign
Pri
Source Select
ME Mode
Sec ME Mode
Row 1, 2, 3, 4 Defined in: User Setups, Panel
Prefs, Bus DPOP Prefs
Wipe 1, 2 Transition/Multi-Function Wipe Pattern
User 1-6 and Key Prior
Transition
ME
Key 1-6 Keyer Mode
SzLc
Multi-Function
iDPM, Transform
3dLc
ROT
SPIN
Axis
ASPT
SCEW
PGLB
SGLB
Sngl Events List
MULT Device Control
ME 1, 2, 3, 4, and PGM System Bar Defined in: User Setups, Suite
Prefs, Safe Title Prefs
SPOP Button Module Menu Displayed
Menu Local E-MEM E-MEM & Timeline