112 KAYENNE — User Manual
Section 3 — System Operation
Menu Panel Overview
Menu Panel Description
The Menu Panel includes a touch screen display, five knobs for adjusting
parameter values, and four USB ports (two on lower right side and two on
the bottom of the Menu Panel).
Touch Screen
CAUTION Do not apply any sharp or rigid object (no pens or pencils) to the touch
screen display surface.
The Menu Panel touch screen allows direct interaction with menu controls
displayed on the screen. The screen is designed to work with a finger or
other soft object. The touch screen is sensitive to a single pressure location
only, so only one touch surface control can be adjusted at a time.
Menu Selection
Various Kayenne system operating menus are selected using the menu
buttons at the bottom of the Menu Panel touch screen. When a menu is
accessed, it is initially displayed in the state it was in when last used.
Soft Knobs
Soft Knob
Label
Soft
Knob
Data
Pad
8623267_01
Figure 80. Soft Knob and Pad
Knobs along the right side of the Menu Panel can be used to dial in
parameter values for functions displaye
d on the touch screen.
When a knob is active, the touch screen displays the parameter
name and its current value on a data pad (Figure 80, left). The
parameter can be adjusted by turning the knob, or the data pad can
be touched to br
ing up a numeric keypad.
To Next Page
Loading...
