KAYENNE — User Manual 127
Button Mapping
feature, your system should be equipped with source name displays on all
banks so the different sources can be identified.
The Button Mapping menu is accessed by touching User Setups, Panel Prefs,
Button Mapping (Figure 92).
Figure 92. Button Mapping Menu
The Banks delegation buttons are used to select the device to be mapped.
Local Panel Source Button Mapping
The Kayenne Control Panel and Local Aux Module are considered local
panels. Local panel button mappings can be defined the same for all the
banks at once, or you can select individual local panel banks to map differ
-
ently.
1. Touch the labeled Bank button(s) of the banks you wish to map
(
Figure 92). You can select one, some, or all of the banks to be mapped.
Notice that a Select All button is available below the list of bank buttons.
2. Scroll the Button list in the central pane and touch the bank source
button to be mapped in the center pane.
To Next Page
Loading...
