128 KAYENNE — User Manual
Section 3 — System Operation
3. Scroll the Sources list on the right and touch the desired Kayenne source
in the right pane. As the mappings change, the names of the different
sources will appear on the source name displays on the Control Panel
and/or Local Aux Module.
4. Repeat Step 2 and Step 3 until all the bank buttons have been mapped.
5. If you map a source to a button that is currently mapped to another
source, a warning dialog box may appear.
a. Selecting Yes maps the source to the button. The button
originally mapped to that source becomes unassigned.
b. Selecting No clears the window without making any changes.
Remote Aux Panel Source Button Mapping
Note Remote Aux Panels must be installed and configured before their buttons can
be mapped. Remote Aux Panels assigned to a control surface can only be
configured when the Menu Panel is accessing that control surface. See the
separate Kayenne Installation & Service Manual for Remote Aux Panel con-
figuration procedures.
The Remote Aux Button Map menu is accessed by touching Eng Setup,
Node Settings, Remote Aux Button Map (Figure 93).
1. Individual Remote Aux Panels are selected by touching the buttons in
the left pane. Select the
Multi Select button for group selection
(
Figure 93).
To Next Page
Loading...
