132 KAYENNE — User Manual
Section 3 — System Operation
Source Colors
The Control Panel sources can be changed from the Control Panel color
scheme to display user-defined colors (red, green, blue, light red, light
green, cyan, magenta, etc.). For example the operator could set user defined
colors for each camera as shown in
Figure 96 for quick reference.
Figure 96. Source Colors Menu
To Assign Source Colors:
1. Touch User Setups, Panel Prefs, Source Colors to go to the Source Colors
menu (
Figure 96).
2. Select the Logical ID of the desired source (use Multi-Select button for
multiple selections).
3. Select the desired color in the System Colors pane.
4. Selecting the Invert button displays dark text over a colored background
in the Source Module display OLEDs (default is colored text over dark
background).
To Next Page
Loading...
