KAYENNE — User Manual 141
Source Rules
Store a Source Rules Pattern
1. Touch one of the Store 1-6 buttons to store the Source Rules Pattern.
2. To name the stored pattern, touch the center Patt 1-6 button to which you
want to store the pattern in the Source Rules Patterns menu pane, and
a keyboard will be displayed. Type the name and press
Enter.
Apply a Source Rules Pattern to other Sources
Using the Apply buttons, Source Rules Patterns can be applied to any other
source or set of sources.
1. Touch the source buttons to which you want to apply the Source Rules
Pattern.
2. Touch one of the Apply 1-6 buttons previously stored in the Source Rules
Pattern menu pane.
Source Rules Pattern Hold
Rules Holds apply to the delegated MEs. Source Rules Pattern ‘Rules
Holds’ can be applied by either touching the
Rules Hold button in the Source
Ops, Source Rules menu or by pressing the
Rules Hold button on the Source
Select Module for the ME or MEs delegated to that Source Rules Pattern.
CAUTION Applying Rules Holds from the Source Select Module require you to press the
Rules Hold buttons for each ME (including both partitions for a Split ME) del-
egated to that Source Rules Pattern.
To Next Page
Loading...
Need help?
General
