142 KAYENNE — User Manual
Section 3 — System Operation
SetDef MatchDef
The SetDef and MatchDef options permit line rate signal format conversion
of selected Kayenne system outputs and inputs. SetDef output and
MatchDef input conversion is licensed in connector pairs. Conversion is
active when the associated Video Processor Frame ME board is present and
the license is enabled. Selecting an output or input button automatically
brings up controls for that conversion.
Note SetDef and MatchDef may be configured as part of engineering setup using
the Eng Setup, SetDef MatchDef menu. If SetDef or MatchDef has been con-
figured as part of engineering setup, this takes precedence over the TD being
able to change these settings, and these items are grayed out in the Source
Ops, SetDef MatchDef menu.
The default for the Source Ops, SetDef MatchDef menu is Auto Line-Rate
enabled. To access the Source Ops, SetDef MatchDef menu, touch
Source
Ops
, SetDef MatchDef (Figure 101).
Figure 101. SetDef MatchDef Menu, SetDef Selected
SetDef Output Conversion
Each of the eight SetDef buttons report the current source, format, and crop
status for that output.
To Next Page
Loading...
