KAYENNE — User Manual 153
File Operations
Show File Operations
The Show Files menu (accessed from File Ops, Show Files) is used to create,
save, and load Shows. A Show is a special collection of Kayenne files that
can be managed as a group.
Touching the Create Show button opens a create show pane.
In this pane you enter the name of the Show (touch the Show Name data pad),
and if you choose, select which file types and choose a range of registers
that will be included in the Show file.
The Select All (toggle) button selects or deselects all the available file types.
Touching on a file type button selects or deselects that individual type of
file for saving/loading. Touching the data pads just to the left of the file
type buttons allows you to enter a range of registers, of that type, to include
in the show (
Figure 107).
Touching the Create button saves the show into the currently selected direc-
tory. A pop-up panel displays the status of each file type as the Show file is
created.
Figure 107. Create Show File Operations
1. Go to the File Ops, Show Files menu.
2. Select the Create Show button in the Show Create & Load pane (bottom-
center).
To Next Page
Loading...
