KAYENNE — User Manual 163
Transitions
Mix Through Video Transition
One common application of a Mix Through Video transition is to add a
white flash to simulate a photographer’s flashbulb. To set up a simple
white flash effect do the following:
1. Go to the ME, Mattes menu.
2. Select the ME for the transition (left pane).
3. Select the Base Color data pad (right pane).
4. Set the Brightness to 100% and the Saturation to 0% with either the soft
knobs or the popup keypad to create a white matte. The matte will
appear in the Base Color box.
5. Go to the ME, User Trans menu.
6. Select the User Trans Mix Through Matte (1-6) button.
7. In the ME, User Trans menu, touch the Full Screen button under
‘Intermediate Video Appears’ to create a full raster effect.
8. Change the Initial Mix Ends at to a lower number to sharpen the slope of
the mix from the initial to the intermediate video as shown in
Figure 112.
Figure 112. Camera Flash Mix Values
To Next Page
Loading...
