KAYENNE — User Manual 205
Background Matte
Matte Menu Controls
Most of the controls in the Matte menu duplicate the controls in the Multi-
Function Module, Matte mode.
1. Go to the Mattes menu by pressing Keyer, Mattes.
2. If not already selected, touch the Base Color data pad of the desired
Background (1 or 2). Use the top three soft knobs to adjust
Base Hue,
Base Saturation, and Base Brightness of the base fill color (Figure 136).
Figure 136. Matte Menu, Base Color Selected
3. Touch the Wash On button at the bottom so its indicator illuminates to
create a wash matte.
4. Touch the Wash Control data pad to bring up Offset, Softness, and Rotate soft
knob controls. If necessary, use the
Offset and Softness knobs to make the
wash edge visible on the screen. You can also turn on the
Rotate button,
and then adjust the angle of the edge using the
Rotate soft knob.
5. Touch the Wash Color data pad to delegate the soft knobs on the right to
adjust
Wash Hue, Wash Saturation, and Wash Brightness of the wash fill color.
Because all background matte parameters are keyframeable, you can build
effects with constantly changing backgrounds using multiple keyframes.
To Next Page
Loading...
