212 KAYENNE — User Manual
Section 3 — System Operation
Global Channel Control Over Multiple MEs
In the Menu Panel only, multiple ME Global channels can be controlled. For
example if three keyers in PGM and three keyers in ME-3 are assigned to
Global control, the two MEs can be combined to control all six keyers glob
-
ally by touching the PRI Global (or SEC Global if configured with Split ME)
button data pad for each ME (
Figure 141). All keyers on PGM and ME-3
execute the same transform.
Figure 141. Transform Menu, Multiple ME Global Channel Control
Secondary Global Channel
By splitting the ME into Primary and Secondary partitions, you can assign
keyers in the Secondary Partition to global control just as with the Primary
Partition. This allows you to create very complex effects on both outputs,
including making keys on the Primary Partition visible on the Secondary
Partition and vice versa.
The ME partition must be split into Primary and Secondary before the Sec-
ondary Global channel can be assigned. Touch ME, Mode to access the Mode
menu (
Figure 142).
To Next Page
Loading...
