KAYENNE — User Manual 227
iDPM Operations
Shadow Crop Controls
The Crop controls in the Shadow pane are used to adjust shadow cropping
and edge softness. The current parameter names and values are displayed
on the data pads.
When Crop Follow Image is selected, crop values of the shadow match the
crop values used for the primary image. Only shadow edge softness con
-
trols are active in this mode. When the Crop Softness data pad is selected soft
knob controls for shadow edge softness are available (Top, Bottom, Left,
and Right). The total softness of the shadow edges will be the softness of
the shadow edge combined with any softness of the primary image.
When Separate Crop is selected, the edges of the shadow can be given crop
values different from the primary image. Touching the
Crop Edge data pad
delegates the soft knobs to control shadow edge cropping (Top, Bottom,
Left, and Right).
Glow Pane
The Glow controls on the menu affect the delegated keyers. Touch the Glow
data pad button to access the Glow controls (
Figure 155).
Note Glow is provided without the iDPM option in the Keyer, Borderline menu.
Figure 155. Glow Pane
To Next Page
Loading...
