234 KAYENNE — User Manual
Section 3 — System Operation
When Back is Matte is selected, the back of the effect will be a matte color. The
color of the matte can be changed by touching the Back Color data pad to
bring up soft knob controls for Hue, Saturation, and Brightness.
Split Axis Pane
Split page turn and roll effects are controlled with the Split Axis pane,
bottom left of menu (
Figure 160). The effect can be split horizontally, verti-
cally, or both ways using the labeled buttons (Horiz Split/Vertical Split).
Selecting the Split Axis Position data pad brings up Horizontal and Vertical soft
knobs that control the location of the split.
Ripple Mode
Ripple is an effect in which the source video mapped to a plane is effec-
tively distorted into and out of the target screen by a train of concentric
waves. This is a parallel projection to the target screen with no perspective.
Touch the Ripple Kurl Mode button to access the Ripple controls.
When the Modulation data pad is selected in the Ripple pane appears
(lower left,
Figure 161).
Figure 161. Kurl Menu, Ripple Modulation
To Next Page
Loading...
