238 KAYENNE — User Manual
Section 3 — System Operation
Splits Mirrors Menu
The Splits and Mirrors effect allows you to divide a picture horizontally
and/or vertically, and create mirror images of the image along these axes.
Touch the
iDPM, Splits & Mirrors button to access the Splits and Mirrors con-
trols (Figure 165).
Figure 165. Splits/Mirrors Menu
Splits Pane
Touch the Splits On button in the Splits Enable pane (bottom right) to bring
up the Splits controls:
When the Splits button in the Splits data pad is selected, the following soft
knob controls are available. (Values are displayed in screen units.)
Horizontal Center — controls the horizontal position of the split.
Vertical Center — controls the vertical position of the split.
Horizontal Separation — controls the amount of horizontal separation between
the split images.
Vertical Separation — controls the amount of vertical separation between the
split images.
To Next Page
Loading...
