248 KAYENNE — User Manual
Section 3 — System Operation
On Time — sets the percentage of the period that the image is unfrozen.
The default is 0.0%.
On Time is only available when Time is selected as
the Strobe Type.
Strobe Type buttons — set the type of strobe effect that will cause the auto-
matic freezing of the new image.
• None button — turns Strobe Off
•
Time button — freezes a new image at an adjustable time interval
(normal strobe)
•
Keyframe button — freezes a new image at each keyframe
Loop button
• ON — starts the recursive effect
•
OFF — stops the recursive effect and returns to live video
Keyframe Reset button — is used to control a frozen image. It is only available
when the
Keyframe mode button is selected as the Strobe Type.
ON — A keyframe triggers a reset, followed by a new single strobe. It
resets that loop by creating a new frozen image at each keyframe that
has the
Keyframe Reset button on.
OFF — does not change the frozen image at each keyframe
Force Strobe button — When an effect passes over or stops on a keyframe, a
single strobe event is triggered. While the effect sits on a keyframe with
keyframe-strobe on, no additional events are triggered. The "history" of the
prior single event is discarded and a single strobe is triggered again.
• ON — Accumulates a field/frame of video within the Output Recursive
loop.
•
OFF — No action is taken.
Montage Mode
Creates a montage of still images (Figure 169 on page 246).
Soft Knob Button Group:
Picture Decay — causes the frozen image in the Output Recursive to fade
away evenly over time.
Note Additive effect with Star Decay.
Star Decay — causes random pixels of the frozen image in the Output
Recursive to fade away over time.
Note Additive effect with Picture Decay.
Strobe Timing:
To Next Page
Loading...
