KAYENNE — User Manual 269
Key Store
Key Store is E-MEMable and keyframeable.
Figure 182. Key Store Menu
Grabbing and Using a Key Store Image
The keyer settings are defined in the Eng Setup, Source Definition menu
(see the Kayenne User Manual for more information). For example, setting
the key to Linear and Shaped Video. You will need this information when
creating a Key Store.
Note If not defined, the key will be full raster white.
You can ‘Grab’ both a video and key frame simultaneously by touching
either the
Grab V&K 1 or Grab V&K 2 button, located below each Frame Store
page, or you can touch a
Grab button for any of the four Video/Cutout
Frame Stores (
Figure 182).
Once you have grabbed fill and key images in Key Store, you can ‘use’ them
for the selected key source:
1. Touch the full keyer with which you want to use Key Store (Figure 182,
left).
To Next Page
Loading...
