298 KAYENNE — User Manual
Section 3 — System Operation
Bus Linking Menu
One-to-one (Single), one-to-many (Parallel), and one-to-one-to-one (Cas-
cading) bus links can exist simultaneously in the Bus Links, Links Setup
menu.
The Bus Links menu is divided into two tabs, the Links Setup menu and the
Source Tables menu. The Links Setup menu has the Current Link pane
(
Figure 200, left) and the Table Setup menu (Figure 200, right).
Use the Bus Links menu to link, enable/disable, break, and choose the
source table for bus links. (Standard Table All Sources 1-to-1 is the default
Source Table.)
Figure 200. Multiple Bus Links
Selected Controller bus and Linked bus buttons turn blue when selected in the
Current Link pane. In the example in
Figure 200, the Linked bus button
PGM U2 is the selected button.
The Source Tables menu has the Source Tables pane (Figure 201, left) and
the Table Setup pane (Figure 201, right). The Source Tables menu is used to
To Next Page
Loading...
