KAYENNE — User Manual 299
Bus Linking
select source substitutions within source tables and create a named rela-
tionship between the source table and the links to which they are assigned.
Figure 201. Source Tables
Source Substitution Tables
Source Tables have been added as part of the Bus Link enhancements with
Kayenne 2.0. There are now 15 additional configurable source tables. Each
can be assigned to one, many, or all bus links once configured in the Source
Tables menu (
Figure 202).
In earlier versions of Kayenne, source substitutions could be made on each
bus link but each was treated separately so resources were consumed for
every source selection action. Now, instead, a source table (or lookup table)
can be configured and applied to every bus link which frees up resources
and allows a faster more efficient way of applying the same source substi
-
tutions to multiple bus links. Also, you are now able to create named rela-
tionships between the Source Table and the bus links to which they are
assigned.
The Standard Table All Sources 1-to-1 Source Table is the default. One of the
other 15 configurable Source Tables can be assigned once configured.
To Next Page
Loading...
