328 KAYENNE — User Manual
Section 3 — System Operation
Multiple Events on the Same Keyframe
More than one external device event can be specified to occur in the same
keyframe. If more than one event is specified, they are sent to the device in
Load, Cue, Play order. For example, you can specify only
Load which will
make the device load to the start of the clip, or you can specify
Load and Cue
which will load and cue the device to the entered timecode. Both
Play and
Stop cannot be specified on the same keyframe, however. Turning one on
automatically turns the other off.
Device Control with the Menu Panel
To control devices with the Menu Panel, touch Device, Control (Figure 214).
Figure 214. Devices Control Menu
Standard Cue To Begin, Stop and Play controls are available for all devices con-
figured for control. The Swap buttons transfer the control of devices
between panes.
Additional Rewind, Fast Forward, Var Play Speed, Mark and Jog Forward/Back con-
trols are available in the larger control pane on the left.
To Next Page
Loading...
