330 KAYENNE — User Manual
Section 3 — System Operation
Figure 215. Folder and Clip Selection Menu
Timeline Event Information and Work Buffer Values
The Device Summaries and Current Device data pads update to show the current
state of the work buffer. This indicates two things. First, it shows what
events exist on each keyframe as it is encountered during effect run or time
cursor navigation. Second, it shows what events will be added to the time
-
line if a new keyframe is inserted or one is modified. This is consistent with
other work buffer parameters, but requires some discipline when working
with events. For other parameters, inserting keyframes without changing
values will result in no change between keyframes. But for events, this
same practice will result in reissuing the event at each keyframe. It is a good
practice to use the
Clear All Events or Clear Delegated Device Events button after
inserting or modifying a keyframe containing external device events. This
prevents those same events from being duplicated when the next keyframe
is inserted.
Examples
Preparation for Control
1. Turn on the EXT enable group button (or whichever button your
machine control device has been associated with) and press the
Emem
Edit
button in the Master E-MEM Module.
To Next Page
Loading...
