366 KAYENNE — User Manual
Section 3 — System Operation
Recording a Macro with the Control Panel
1. Turn on Macro record mode by pressing the Rec button.
2. Press the macro row button of the desired macro register. Use the Shift
button to access shifted macro registers.
3. Perform the steps you wish recorded into the macro, in the order they
are to be performed, using the Control Panel and/or the menus.
4. Complete the recording by pressing the Rec button, or pressing the
keyer row macro button.
Recording a Macro with the Menu Panel
Access the Macros menu be touching Macros.
Figure 227. Macros Catalog Menu
1. Go to the Macro Catalog menu (press Macro, Catalog).
2. Touch the Macro Register number button of the register you wish to
record into, in the scrolling list.
3. Touch the Record button.
4. Perform the steps you wish recorded into the macro, in the order they
are to be performed, using the Control Panel and/or the menus.
To Next Page
Loading...
