KAYENNE — User Manual 373
ClipStore (Image Store Clips)
For more information about installing and updating AppCenter Elite soft-
ware, see the Summit/Solo manuals.
ClipStore as an External Device
Note ClipStores 1-4 as devices can only be enabled in the Eng Setup, Devices,
Node Settings menu in the Frame Suite Nodes & ID menu tab.
ClipStores 1-4 will appear as the first four external devices in the Device
Enables scrolling list (
Figure 229), in the Devices, Enables menu (and other
Devices menus). External Device 1 will now be in the 5th position in the
Device Enables list (
Figure 229). Enable/Disable buttons in the Devices
menu do not function for ClipStore.
Note For a two-channel K2 Solo, only ClipStores 1 and 2 are reserved and External
Device 1 will be in the 3rd position.
ClipStore can be used in a gang like any other external device. For more
information about ganging devices, see the Kayenne User Manual.
Figure 229. ClipStore in Device Menu
To Next Page
Loading...
