GRASS VALLEY KAYENNE - V2.0 - External Device Newton Menu Description; Delegation Pvw Bus

430 KAYENNE — User Manual
Section 3 — System Operation
input can be assigned to Kayenne Menu Panel knobs. The user is then able
to control those modules directly from the Kayenne system.
Refer to the separate Newton Instruction Manual and NetConfig Instruction
Manual for specific information about how to configure the Newton con
-
trols. These manuals are available for download from the Grass Valley web-
site.
External Device Newton Menu Description
Once configured, module parameters can be adjusted on the Kayenne
Newton menu, which is accessed by touching
Devices, Newton (Figure 272).
Figure 272. External Device Newton Menu
Selection of a module parameter to control is mediated though the Kayenne
source selection mechanism. By selecting a source on the currently dele
-
gated Preview bus of the Kayenne’s Main panel, the source’s physical
input, and that input’s associated Newton channel controls are activated on
the Kayenne’s Device menu.
Delegation Pvw Bus
The Delegation Pvw Bus pane is used to select which Preview bus will be
used to select the Newton channel to be controlled.