80 KAYENNE — User Manual
Section 2 — Concepts
Figure 58. Tension Control Setting 1.0
In the example below, the TENSION control has been set to -1.0. This
lengthens the Tension vector, causing the path through the middle key
-
frame to be longer and broader (Figure 59). The longer path will appear to
make the image speed up through KF2 as it travels from KF1 to KF3.
Figure 59. Tension Control Setting -1.0
Continuity Control
The continuity adjustment determines the angle of the path into and out of
the keyframe. It is represented by a vector 90 degrees to the tension vector
(
Figure 60). The unmodified path shown is identical to the unmodified
path of the other controls.
Tension = 1.0
KF1
KF2
KF3
No Tension Vector
0721_06_48_r0
Tension = -1.0
KF1
KF2
KF3
Tension
Vector
0721_06_49_r0
To Next Page
Loading...
