GRASS VALLEY KAYENNE - Kayenne Control Panel Cabling; Kayenne M;E and Local Aux Stripe Connections

System Cabling
90
Two Suites Using Two PCUs
Kayenne Control Panel Cabling
Connectors on the outside bottom of the Control Panel tray connect to numbered ports on
the PCU, using special multi-pin cables that carry both power and communications signals.
Special cables are also used to connect the Menu Panels to the PCU.
Kayenne M/E and Local Aux Stripe Connections
It is recommended that the PCU numbered ports be connected to Control Panel Stripes in
ascending M/E order, followed by the Local Aux Stripe. PCU port connections can be re- mapped,
but this order matches the default configuration. The table below shows the connections for
various Kayenne Control Panel models used in a single suite
CPU
Ethernet
CPU
8 5
Internal Control
Menu
7
CPU
8
5
Ethernet
8877_05_r1
Ehternet Switch
Ehternet Switch
Ehternet Switch
CAUTION: Do not connect or disconnect the multi-pin cables linking a
Kayenne Control Panel tray or Menu Panel to the PCU while
the PCU is powered up. Damage to the equipment can result.