118
Set the IPs Using Device Web Pages
1 In the Eng Setup, Node Settings, NMOS Configuration menu, select the Group Hint
Prefix
data pad.
2 Read, and if you agree to the Warning, select OK.
3 Enter a prefix in the pop-up keyboard and select Enter.
Unicast DNS-SD
Unicast DNS-SD and mDNS are supported. By default NMOS discovery will attempt both mDNS and Unicast-SD to
discover a registry on the network.
Entering an IP address other than 0.0.0.0 for the Global Registry in the menu Eng Setup > Node Settings >NMOS
Configuration > Global Registry IP Address and Port, will disable mDNS and Unicast-SD and the Frame will only
attempt to connect to the given IP address. Redundancy not possible in this mode.
Requirements for In-band Unicast-SD
1. DHCP Server on the Media Network
2. DNS on the Media Network
3. Configuration file for the DHCP server which provides domain-name-servers AND domain-name
4. DNS configuration file which contains the NMOS services (_nmos-register, _nmos-query, … ) which refer
to the NMOS registry(s)
5. IP Board needs to be visible to the DHCP Server and DNS (ping test)
To Next Page
Loading...
