3
GV K-Frame XP
GV K-Frame XP Compact Frame
• Up to 80 inputs and 48 outputs.
• Up to 6 VPEs which can be used as MEs or Multiviewers
• Up to 6 M/Es, accessible across four suites, increased to 12 virtual M/Es by using
DoubleTake.
• Every M/E has six keyers with standard keying modes including Chroma Key, two frame
stores per keyer—every keyer can use the pool of floating 3D iDPMs.
• 2D-DPMs with perspective on every keyer, so iDPMs can be utilized for more
complex effects.
• Up to 16 iDPMs (Integrated Digital Picture Manipulators), assigned as either floating
iDPMs or within an eDPM at user’s discretion.
• An optional built-in multiviewer with six pre-configured layouts (maximum 64
panes per layout) and On-Air/Preview tally which does not use one of the VPEs.
GV K-Frame XP Standard Frame
• Up to 192 inputs and 96 outputs.
• Up to 9 VPEs which can be used as MEs or Multiviewers
• Up to 9 M/Es, accessible across four suites—by using DoubleTake this may be increased
to 18 virtual M/Es. , accessible across two suites—by using DoubleTake this may be
increased to 18 virtual M/Es.
• Every M/E has six keyers with standard keying modes including Chroma Key, two frame
stores per keyer.
• 2D-DPMs with perspective on every keyer, so iDPMs can be utilized for more complex
effects.
• Up to 16 iDPMs (Integrated Digital Picture Manipulators), assigned as either floating
iDPMs or within an eDPM at user’s discretion.
• U
p to 16 iDPMs (Integrated Digital Picture Manipulators), assigned as either
floating iDPMs on any keyer or within an eDPM at user’s discretion.
K-Frame Control Surfaces
Kayenne Control Surface
A Kayenne control surface typically consists of a Control Panel, a Menu Panel with an
included articulated support arm, a Panel Control Unit (PCU) frame, and optional Satellite
Panels. This control surface has an innovative modular design. Representative Kayenne
control surfaces are shown in the following illustrations.
To Next Page
Loading...
