GRASS VALLEY KAYENNE - GV Korona Joystick Calibration

Maintenance
300
GV Korona Joystick Calibration
Lever Arm Calibration Procedure, Transition Area
Note: Selecting Exit cancels the Lever Arm calibration mode and returns
that Transition Area to transition operations, but may leave the Lever Arm in
an un-calibrated state. Complete the entire calibration procedure to ensure
normal operation.
GV Korona Joystick Calibration
1 In any E-MEM area, press Menu, Page. This shows a list of menu items that are selected
with the buttons below the display.
2 Select
Calib (press 7) to enter calibration mode.
3 Choose the Joystick to calibrate (press Lrn).
8804_03
1 2 1 2
PVW
Next Exit
1 2 1 2
PVW
Next Exit