GRASS VALLEY KAYENNE - GV Korona Panel Saver Time Adjustment

Installation & Service Manual
301
Karrera Joystick Selection, E-MEM Area
4 Follow the joystick calibration instructions shown on the E-MEM display.
a Move the Joystick to the top left corner, rotate it counter-clockwise, hold, and press
Lrn.
b Move the Joystick to the bottom right corner, rotate it clockwise, hold, and press
Lrn.
c Allow the Joystick to return to its center, unrotated position, hold, and press
Lrn.
Joystick Calibration Instructions 2, 3, E-MEM Area
Note: Pressing the Menu button cancels the Joystick calibration mode, but
may leave the Joystick in an un-calibrated state. Complete the entire
calibration procedure to ensure normal operation.
GV Korona Panel Saver Time Adjustment
1 In any E-MEM area, press Menu, Page. This shows a list of menu items that are selected
with the buttons below the display (on the left).
Karrera Calibration Menu, E-MEM Area
Menu 2
Joystick
Lever
Lever Lever Lever
1 2 3 4
8804_04
8804_08
8804 07
Joystick Calibration
Move joystick to the top left corner.
Twist the joystick counterclockwise.
Press LRN to continue.
Joystick Calibration
Move
joystick to the bottom right corner.
Twist
the joystick clockwise.
Press LRN to continue.
Joystick Calibration
Move
joystick to the center.
Do not twist the joystick
.
Press LRN
to complete.
Menu 1
Macro
Panel Stripe
Mem Delg
Trans
Rate
Menu 2
IP
Addr
Calib Time Date
Panel
Saver