10
GV Korona Control Surfaces
A GV Korona control surface consists of a Control Panel with Source Select, Transition,
Delegation, and Master/Local E-MEM areas, and a built-in multi-touch display with menu
system.
Basic Single Suite GV Korona Panel System Example
GV Korona 2-M/E 20 Control Panel K-Frame V-series 3-RU
Multiple Suites and Control Surfaces Example
Any K-Frame Kayenne, Karrera, or GV Korona Control Panel can be configured with any K-
Frame Video Processor. The K-Frame system can be subdivided into four suites and each
suite can have up to two control surfaces. Hardware resources in the Video Processor Frame
can be assigned to an individual suite during configuration, essentially creating four
separate switchers sharing one Frame. See the K-Frame Installation & Service Manual for
suite configuration information
To Next Page
Loading...
