Installation & Service Manual
29
Power Supply Frame Rack Installation and Airflow
The power supply frame used with the 15-RU GV K-Frame XP is ideally rack mounted immediately
above the Video Processor chassis. The power supply frame is then supported by the lower chassis
and eliminates the need for power supply rear rack supports.
In addition, this placement allows removal of the GV K-Frame XP front door.
If the power supply frame is not mounted above the GV K-Frame XP chassis, rear rack supports
are required. If mounting in an alternative location, allow for the 34” DC
interconnect cable
length.
Power Supply Rack Installations and Cooling Airflow
To Next Page
Loading...
