GRASS VALLEY KAYENNE - Menu Panel Hardware Installation with Articulated Arm; Wall Mounting Without Articulated Arm

Installation & Service Manual
69
Menu Panel Hardware Installation With Articulated Arm
Menu Panel Hardware Installation With Articulated Arm
Fanless PC
B
Attach four
touch screen
hex screws next.
“U” Bracket
“T” Bracket
“X” Bracket
Touch Screen Menu
Attach “X” bracket to
articulated arm mount
with four flat-head
screws first.
Articulated Arm
Slide Fanless PC into
place, then attach
Mount (rest of
arm not shown)
Attach lower two
articulated arm
upper two articulated arm
round-head screws last.
Fanless PC Mounting Bracket Assembly
Wall Mounting Without Articulated Arm
round-head screws next.
For flat mounting directly to a vertical surface without using the articulated arm, two #10
screw sized washers (2.5 mm/0.10 in. thick) can be used at the lower two “U” bracket screw
locations.
8804_24_r1
A
D
C