Video Mix/Effects
Glow Color
102
Glow adds a soft edged variable opacity border around keys, leaving the original keyed
image unmodified, and is a standard feature available on all GV Switcher systems.
Off—The Glow effect is deactivated.
Glow—The Glow effect is applied around the keyed image which remains visible.
Full raster video must be resized or cropped for glow to be visible.
Glow Only—The glow effect is applied to the entire keyed area, replacing the original keyed
image. Only the glow is shown.
Outline—The glow effect is shown around the keyed area, but the original keyed image is
not shown. Only the border area of the glow is visible.
When the Glow pane is activated, knob controls for Glow Width, Aspect, Opacity, and
Softness are available.
Note: The Glow Softness parameter value is shared with Shadow
Softness. Adjusting either Glow or Shadow Softness will affect both Glow
and Shadow Softness.
Glow Color
When the Glow Color pane is activated, knob controls for matte Hue, Saturation, and
Brightness become available. An approximation of the color of the matte is shown at the
bottom of the pane. Use these controls to adjust the color of the Glow.
Glow Path Control Pane
Controls for glow path, using the standard Hold, S Linear, Linear, and Curve parameters, can
be applied when the Adjust Path button is on (top right of Borderline menu).
To Next Page
Loading...
