Video Mix/Effects
Mod Type Pane
104
• H/V Angle—defines the angle of the Position Modulation with respect to the source X
and Y axes.
Mod Type Pane
With an axis selected, you select the type of modulation to be applied to that axis (Position
Mod or Size Mod), or no modulation at all with the Mod Off button in the Modulation Mode
pane. When the Vertical axis is selected, you can choose to have that axis’ modulation
values match the horizontal values with the Track Horiz button.
When Size Mod is selected in the Modulation Mode pane, the Size Mod Center data pad in
the Modulation pane is active. When this data pad is selected soft knob controls for H
Position, V Position, and H/V Angle are available.
Pattern Pane
The type of wave pattern to be applied to the selected axis and modulation type is selected
in the Pattern pane.
• Cycle Limiting—activates the Cycles soft knob. This control can be used to limit the
number of wave pattern cycles.
• Cycles + ve Only—selects only the positive portion of the wave cycle. Representative
wave shapes.
Normal
+ Only
Normal
+ Only
Sine Circle
Triangle Random
(Illogical, pattern lost)
Square Pulse
Ramp
Trap
Available Wave Patterns
Page Turn/Roll Mode
0721_08_83_r0
Page Turn is a transition effect with the video being mapped to an original plane, a cylinder,
and a final plane parallel to the original plane. Page Roll maps the video to an original plane
and a cylinder. Page Turn and Roll are parallel projections to the target screen with no
perspective.
To Next Page
Loading...
