Kayenne/Karrera/GV Korona
User Manual
107
DPM Splits Mirrors Menu
Located in the DPM, Splits & Mirrors menu, the Splits and Mirrors effect allows you to divide
a picture horizontally and/or vertically, and create mirror images of the image along these
axes.
Splits Pane
Select the Splits On button in the Splits Enable pane (bottom right) to bring up the Splits
controls:
When the Splits button in the Splits data pad is selected, the following soft knob controls
are available (values are displayed in screen units):
• Horizontal Center—controls the horizontal position of the split.
• Vertical Center—controls the vertical position of the split.
• Horizontal Separation—controls the amount of horizontal separation between the split
images.
• Vertical Separation — controls the amount of vertical separation between the split
images.
• All Separation—controls both horizontal and vertical separation simultaneously. This
control is additive with the other separation controls, such that changing its values
changes the H and V separation values.
When the Separate Sides data pad is selected, individual soft knob controls for separation
are available. These controls allow movement of individual Top, Bottom, Left, and Right
portions of the split image.
Splits & Mirrors Modifiers Pane
The Splits & Mirrors Modifiers pane has mirror and double image controls.
The mirror buttons replicate the side of a picture about the axis location to the opposite
side. Mirror orientation is based on the picture’s source space. It is possible to
simultaneously reflect multiple sides by turning on the Mirror Top, Mirror Right, Mirror Left
and Mirror Bottom buttons. The original picture for that side is always reflected. A side that
has been mirrored to the opposite side will not be mirrored a second time.
When Double Image is on, the area of separation is filled by extending the interior sides of
each half of the original split picture to the axis position. At large separation values the
picture will be doubled about the axis. This control only has an effect when separation
exists between the splits.
DPM Defocus Menu
Available in the DPM, Defocus menu, Defocus blurs the actual keyed image, and is available
with the iDPM option.
Defocus Pane
• Defocus Off—The Defocus effect is deactivated.
To Next Page
Loading...
