Video Mix/Effects
Montage Mode
112
• Keyframe Reset button—is used to control a frozen image. It is only available when the
Keyframe mode button is selected as the Strobe Type.
• ON—A keyframe triggers a reset, followed by a new single strobe. It resets that
loop by creating a new frozen image at each keyframe that has the Keyframe Reset
button on.
• OFF—does not change the frozen image at each keyframe
• Force Strobe button—When an effect passes over or stops on a keyframe, a single
strobe event is triggered. While the effect sits on a keyframe with keyframe-strobe on,
no additional events are triggered. The “history” of the prior single event is discarded
and a single strobe is triggered again.
• ON—Accumulates a field/frame of video within the Output Recursive loop.
• OFF—No action is taken.
Montage Mode
Creates a montage of still images.
Soft Knob Button Group:
• Picture Decay—causes the frozen image in the Output Recursive to fade away evenly
over time.
• Star Decay—causes random pixels of the frozen image in the Output Recursive to fade
away over time.
Strobe Timing:
• Period—defines the number of frames in a Strobe Cycle. Period is only available when
Time is selected as the Strobe Type.
• On Time—sets the percentage of the period that the image is unfrozen. The default is
0.0%. On Time is only available when Time is selected as the Strobe Type.
Strobe T
ype buttons—set the type of strobe effect that will cause the automatic capture of
the new image.
• None—turns Strobe Off
• Time—freezes a new image at an adjustable time interval (normal strobe)
• Keyframe—freezes a new image at each keyframe
Loop button:
• ON—starts the recursive effect
• OFF—stops the recursive effect and returns to live video
Keyframe Reset button—used to control when images are frozen. It is only available when
the Keyframe mode button is selected as the Strobe Type.
• ON—A keyframe triggers a reset, followed by a new single strobe. It resets that loop by
creating a new frozen image at each keyframe that has the Keyframe Reset button on.
• OFF—does not change the frozen image at each keyframe
Force Strobe button — When an effect passes over or stops on a keyframe, a single strobe
event is triggered. While the effect sits on a keyframe with keyframe-strobe on, no
additional events are triggered. The “history” of the prior single event is discarded, and a
single strobe is triggered again.
To Next Page
Loading...
